|
Parani-SD200 |
Serial Interface |
RS232, Female DB9, 1200~230 Kbps |
CTS/RTS flow control: Default |
DTR/DSR for loop-back & full transfer |
Bluetooth Interface |
Bluetooth v1.2 Class 2 Level - Max. 4dBm Protocols - RFCOMM, L2CAP, SDP Profiles - General Access Profile, Serial Port Profile
Working distance
Default Antenna - Default Antenna 30 meters Default Antenna - Dipole Antenna 50 meters Dipole Antenna - Dipole Antenna 80 meters Patch Antenna - Dipole Antenna 150 meters Patch Antenna - Patch Antenna 300 meters | |
Max. Tx power |
+4dBm |
Receive Sensitivity |
-80dbm |
Antenna gain |
Stub : +2dBi, Dipole : +3dBi, Patch : +9dBi |
Configuration |
ParaniWin, ParaniUpdater |
Modem AT command set |
Diagnostic LED |
¡¤ Power ¡¤ Standby ¡¤ Connect ¡¤ RS232-Tx ¡¤ RS232-Rx |
Power |
- 5~12VDC - Nominal current consumption : ¤ýSD100 : 100mA @ 5.0Vdc approximately ¤ýSD200 : 70mA @ 5.0Vdc approximately |
Common Power supply options
- Power via a standard AC-plug DC-adapter
- Power via USB power cable
- Power via DC power cable
- Power via pin 9 of DB9 connector
- Battery Pack for SD200 only
|
Battery Usage Time |
When using battery pack for SD200 : Typical 1.5V -AA alkaline batteries (2500mAh) - Avg. 11hr@9600bps
Note : Depending on the batteries and its usage environment greatly determines how long the Parani product will last for their application, i.e.battrery storage, battery capacity, battery brand and so on. |
Environmental |
Operating temperature: -10'C to 55'C |
Storage temperature: -20'C to 70'C |
Humidity: 90% Non-condensing |
Physical properties |
Dimension (LxWxH)
|
Weight: 20g |
MTBF |
394.4 Years |
Regulatory Approvals |
FCC Part 15 Subpart C Section 15.247 FCC Part 15 Subpart B ETSI EN 300 328 ETSI EN 301 489-1 ETSI EN 301 489-17 EN61000-3-2, EN61000-3-3 EN60950-1 MIC TELEC |
SIG QDID |
B012405 |
Warranty |
3-year Limited Warranty |